The Airheads Beemer Club is a non-profit club reclaiming the 'Legendary Motorcycles of Germany'
Please take a moment to read the DISCLAIMER.

R100GS Acerbis High Fender

Let's get something out of the way right up front: If conditions are so bad that you're worried about mud packing between the front fender and the wheel, you've got no business on that road with an R100GS. A high fender on an R100GS is just poseur hardware. But when your factory low fender gets mangled beyond recognition, you're left with a choice between high and low. More out of curiosity than anything else, I chose high. Now I had to decide on which fender. If you look hard enough, you might turn up a used Paris/Dakar fender, but I wasn't overly enamored of the bulbous tip at the front and lack of vents at the rear. You see, I'd decided to relocate the oil cooler so I could install an H.I.D. driving light on the right crash bar, and the new location was right behind the new high front fender. While I was at the Touratech-USA web site ordering the oil cooler relocation kit, I noticed that they also carried the Acerbis high fender. Surprisingly, it was modestly priced (~$40) so I snagged one. They call it the BAJA, and it comes in white. All the better for re-painting, I though to myself. I remembered my buddy Louis complaining that the high fender on his R80G/S caught the wind and made the bike weave at high speed, but that he'd installed a brace, also from Acerbis, that fixed the problem. I couldn't find it at the Touratech site, but a call down to Mike at Fremont Cycle Salvage had one on the way.

This remainder of this article is only available for Airheads Beemer Club members. Please Log In..or..Click Here to join the Airheads Beemer Club, after which you will enjoy access this article and all members only content of the ABC web site.