The Airheads Beemer Club is a non-profit club reclaiming the 'Legendary Motorcycles of Germany'
Please take a moment to read the DISCLAIMER.

[ ad supports Snowbum's website ]

Bosch Metal Can Mechanical Voltage Regulator, Cleaning & Adjusting

NOTE: The /2 metal can VR is included at the end of this article

http://bmwmotorcycletech.info/boschmechreg.htm
21

© Copyright, 2012, R. Fleischer

INTRODUCTION:

The first part of this article covers the basics for this 12 volt VR unit, as used on BMW Airhead motorcycles before BMW changed to electronic ignition in 1981. This article applies ONLY to the mechanical voltage regulators. These were used on the Airheads from 1970 to ~1980.

At the end of this article are some addendums. #1 is a description and schematic diagram.  #2 is for the BMW /2 (6 volt) motorcycle's VR. I suggest you DO read that section, even if you do not have a /2, as it has a slightly different way of explaining the servicing (included in this article).

Voltage regulators, both mechanical & electronic, in metal cans, were installed as stock items on early BMW Airhead motorcycles. There is nothing wrong with the mechanical type for the early BMW Airhead Motorcycles, except that mechanical types DO wear, over time & mileage. In an emergency an old mechanical VR might do OK in any Airhead model, although the electronic ignition could possibly (not necessarily will) miss-fire occasionaly with a mechanical regulator. Mechanical regulators wear mostly from their constant points vibrating/buzzing/arcing. Electronic regulators will substitute for the mechanical regulator on any Airhead model, directly, with no problems. All the mechanical regulators were inside of tall metal cans. Later voltage regulators were electronic; but the early electronics versions ALSO were in metal cans, but they were shorter in height.  The next series were in smallish plastic cases, often with black bodies and red tops. There are aftermarket electronic regulators available, some are adjustable, & most 3 male spades type of voltage regulators from European cars (that the Airhead cable plug fits into) could also be substituted. The stock METAL can electronic regulators are also adjustable, there is an article on this Airheads website about how to go about that, since the adjustment is sealed. There is also a bit more of an article here:  http://bmwmotorcycletech.info/boschelreg.htm

STANDARD SYSTEM TEST:  

This remainder of this article is only available for Airheads Beemer Club members. Please Log In..or..Click Here to join the Airheads Beemer Club, after which you will enjoy access this article and all members only content of the ABC web site. 

Return to Tech Tips

Connect to Snowbum's HomePage