The Airheads Beemer Club is a non-profit club reclaiming the 'Legendary Motorcycles of Germany'
Please take a moment to read the DISCLAIMER.

CenTechDone

Auxiliary Electrical Bus

The R100RT doesn't use the modern CANBUS electrical architecture of the latest BMW motorcycles, and in my book that's a good thing. As a result there's no need to play games trying to trick computers into providing electrical power for accessories, but the flexibility and safety provided by a well designed and built auxiliary electrical bus pays big dividends even on a twenty year old bike. I plan on powering an electric jacket, electrified tankbag, GPS, and auxiliary lights, and didn't want a hodgepodge of wires running around under the tank. I used a Centech AP2 fuse panel when I added driving lights on the R100GS, so decided to go that route with the RT as well. The AP2 is an upgrade to the AP1 on the GS, and it has two banks of fuses and power taps, each with a separate power source. That would let me wire one so that it was always on, and switch the other bank with the ignition. That's a nice option for a GPS, which doesn't draw a lot of current and is sometimes used when the engine is off. Yet there's no chance of leaving on heavy drawing items like a jacket or lights if you forget to turn them off, as turning off the ignition will kill them all.

CenTechComponents

The biggest problem was

This remainder of this article is only available for Airheads Beemer Club members. Please Log In..or..Click Here to join the Airheads Beemer Club, after which you will enjoy access this article and all members only content of the ABC web site.