The Airheads Beemer Club is a non-profit club reclaiming the 'Legendary Motorcycles of Germany'

Topic-icon centerstand bushings

  • 8244
  • 8244's Avatar Topic Author
  • Offline
  • Toaster Level
  • Toaster Level
More
4 months 2 weeks ago #4719 by 8244
centerstand bushings was created by 8244
I'm in the process of tightening up my son's center stand on his 1982 RS. My local dealer says that I need to measure the bushing because there are two different sizes listed. RealOEM says that both choices are superseded by a third one. I looked up the third # and it doesn't look anything like the original(it's a K bike part). I'm confused as to how two different sized parts can be replaced by a single one that doesn't look like either of them. Can anyone shed some light on this?

46521236528 and 46522301704 are the two choices and 46521454038 is the replacement for both.

Thanks
Mark

Please Log in to join the conversation.

  • 8244
  • 8244's Avatar Topic Author
  • Offline
  • Toaster Level
  • Toaster Level
More
4 months 2 weeks ago #4736 by 8244
Replied by 8244 on topic centerstand bushings
Problem resolved and proper 11mm bushings on the way.

Please Log in to join the conversation.

More
3 months 1 week ago #4932 by 1559
Replied by 1559 on topic centerstand bushings
i made some new bolts so that the bushing does NOT RIDE ON THREADS.
a longer bolt cut down to length and some die work allows the inner bushing full bolt contact ......

just not on the threads . mine are also flanged bolts.



. Harry


.
Attachments:

Please Log in to join the conversation.

Moderators: Wobbly
Time to create page: 0.766 seconds