The Airheads Beemer Club is a non-profit club reclaiming the 'Legendary Motorcycles of Germany'

Topic-icon Introduction/New Member

  • PTMillar
  • PTMillar's Avatar Topic Author
  • Offline
  • R100 Level
  • R100 Level
More
3 months 1 week ago #4945 by PTMillar
Introduction/New Member was created by PTMillar
Hello all. I am 34 yrs old and I just received the first bike I ever rode on as a gift! A family friend who took me for a ride on his 1983 R80RT when I was 17 emailed me out of the blue explaining that he was getting on in years and wondered if I'd like to be the bikes next owner. I said that it would literally be a dream come true and went to pick the bike up and ride it home. He had owned the bike for 18 years and gave me a stack of receipts and records of all the work that had been done and informed me it was tuned up, registered, insured and inspected for the 2019 season. I put the bike in the bed of my friends pick-up truck in the rain and drove north and stayed the night at a hotel. The weather was excellent in the morning so we took the bike down and I rode 100 absolutely glorious miles north. After filling the tank up with gas I pressed the starter button and heard bad sounding metal on metal noise and it was clear that nothing was spinning the engine. I put it back on the truck and brought it home and now I have taken it apart and found that the flywheel spins freely within the clutch assembly. I originally though it might have been a starter problem so when I took the starter off and was inspecting the teeth of the flywheel I realized it wasn't connected to anything. Not sure how it happened but I am determined to fix the problem myself. I have lusted after 1980's airheads since my first ride half my lifetime ago. I was excited to do my own maintenance but I thought I might get more miles in before I had to start with a major repair like this. I will start a post in the Tech section detailing my work. Any advice is much appreciated as I'm new to all of this. My previous bike was a 1981 Honda Cm200T and I replaced a head gasket on that but my wrenching experience is limited. My enthusiasm is high however, and i'm thrilled to be a member of this club

Thanks,
Pete

Please Log in to join the conversation.

More
3 months 1 week ago - 3 months 6 days ago #4946 by Wobbly
Replied by Wobbly on topic Introduction/New Member
Welcome Aboard !

Yikes ! You're right.
That's not your typical "Welcome to Airheads" mechanical issue !

Don't hide 'em, Ride 'em !!
#15150
Last edit: 3 months 6 days ago by Wobbly.

Please Log in to join the conversation.

Moderators: 14652Wobbly
Time to create page: 1.073 seconds